HP CB510A HP LaserJet P4010 and P4510 Series - User Guide - Page 78
Manually con IPv6 TCP/IP parameters from the control panel, CON DEVICE
View all HP CB510A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Manually configure IPv6 TCP/IP parameters from the control panel In addition to using the embedded Web server, you can also use the control-panel menus to set an IPv6 address. 1. Press Menu . 2. Press the down arrow to highlight CONFIGURE DEVICE, and then press OK. 3. Press the down arrow to highlight I/O, and then press OK. 4. Press the down arrow to highlight EMBEDDED JETDIRECT MENU, and then press OK. 5. Press the down arrow to highlight TCP/IP, and then press OK. 6. Press the down arrow to highlight IPV6 SETTINGS, and then press OK. 7. Press the down arrow to highlight ADDRESS, and then press OK. 8. Press the down arrow to highlight MANUAL SETTINGS, and then press OK. 9. Press the down arrow to highlight ENABLE, and then press OK. 10. Press the down arrow to highlight ADDRESS, and then press OK. 11. Use the numeric keypad, or press the up arrow or the down arrow to enter the address. Press OK. NOTE: If you are using the arrow buttons, you must press OK after entering each digit. 12. Press Menu to return to the Ready state. 66 Chapter 5 Connectivity ENWW