HP CC376A HP Color LaserJet CP1210 Series - User Guide - Page 72
Alert message, Description, Recommended action, Load Paper <Type> - service manual
View all HP CC376A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Alert message Description Recommended action If the message persists, contact HP support. See HP Customer Care on page 90. Front Access Door Open The door is open. Close the door. Fuser Error The product has experienced an error with the fuser. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If the error continues, turn off the product, wait at least 25 minutes, and then turn on the product. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Use the power switch to turn on the product. If the message persists, contact HP support. See HP Customer Care on page 90. Incorrect Cartridge A print cartridge is installed in the incorrect slot. Be sure that each print cartridge is in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, and yellow. Install Cartridge The cartridge is either not installed or not correctly installed in the product. Install the print cartridge. Jam in The product has detected a jam. ( indicates the area where the jam has occurred) Clear the jam from the area indicated in the message. The job should continue to print. If it does not, try reprinting the job. See Jams on page 67. If the message persists, contact HP support. See HP Customer Care on page 90. Load Paper The tray is empty. Load print media into the tray. Magenta Scanner Error An internal error has occurred. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Use the power switch to turn on the product. If the message persists, contact HP support. See HP Customer Care on page 90. Manual feed The product is set for manual feed mode. Load the correct media into the tray, and then press the Resume button to clear the message. Non-HP Cartridge A new, non-HP supply has been installed. This message appears until an HP supply is installed or you press the Resume button. If you believe you purchased an HP supply, go to www.hp.com/go/anticounterfeit. Service or repairs that are required as a result of using non-HP supplies are not covered under HP warranty. To continue printing, press the Resume button. 64 Chapter 7 Solve problems ENWW