HP Chromebook x360 11MK G3 Education Edition Maintenance and Service Guide 1 - Page 39
Touchpad cable, that secures the touchpad cable to the computer.
![]() |
View all HP Chromebook x360 11MK G3 Education Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
10. Release the ZIF connector (5) to which the touchpad cable is connected, and then disconnect the touchpad cable from the system board. 11. Remove the top cover/keyboard. Reverse this procedure to install the top cover/keyboard. Touchpad cable To remove the touchpad cable, use this procedure and illustration. NOTE: The touchpad cable is included in the Cable Kit, spare part number M49315-001. Before removing the touchpad cable, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 28). 2. Remove the top cover/keyboard (Top cover/keyboard on page 28). Remove the touchpad cable: 1. Remove the rubber pad (1) that secures the touchpad cable to the computer. The rubber pad is included in the Rubber Kit, spare part number M50144-001. 2. Detach the clear shield (2) that covers the touchpad cable ZIF connector on the system board. 3. Release the ZIF connector (3) to which the touchpad cable is connected, and then disconnect the touchpad cable from the touchpad. ENWW Component replacement procedures 31
![](/manual_guide/products/hewlettpackard-chromebook-x360-11mk-g3-ee-maintenance-service-guide-c6511c4/39.png)