HP Cisco MDS 8/24c Release Notes HP C-series Fabric Switches for NX-OS 5.2(2) - Page 30

Hp Specific Known Issues

Get HP Cisco MDS 8/24c PDF manuals and user guides View all HP Cisco MDS 8/24c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

HP SPECIFIC KNOWN ISSUES Problem Description: Issuing an "End to End Connectivity" to the EVA4400/6400/8400 may crash both EVA controllers at the same time. Workaround: None. Problem Description: Issuing an fcping to the EVA4400/6400/8400 may crash the EVA controller Workaround: None. Problem Description: If it becomes necessary to move an EVA controller port to a different port on the same C-series switch or to a port on a different C-series switch, the corresponding controller port may become unavailable. Workaround: Restart the EVA controller. Problem Description: The P6300/P6500, EVA4400/6400/8400, MSA2000 G1, MSA2000 G2, and P2000 FC G3 storage arrays may display as servers in the Fabric Manager or Data Center Network Manager topology diagram or host ports list. Workaround: Perform the following steps to change the display of the array from a host icon to a storage icon. 1. Log into Fabric Manager or Data Center Network Manager 2. Under "Physical Attributes" open "End Devices" 3. Select "Hosts" and click on the "Enclosures" tab in the Information Pane 4. Under "Device Type" for the desired device, in Fabric Manager select "Disk", or for Data Center Network Manager select "Storage" 5. Save changes by selecting the "Apply Changes" icon on the top left corner of the Information Panel Problem Description: HP C-class fibre channel mezzanine cards may not log into the embedded C-series fibre channel switch at the supported speed and mode. Workaround: Set the internal switch port from auto to the supported speed and mode. Problem Description: The SN1000E 16Gb Emulex HBA properties may display as "Unknown" vendor in Data Center Network Manager Host Ports list. Workaround: Enabling the FDMI in Emulex driver by setting the driver parameter EnableFDMI to 1 will allow Data Center Network Manager to display the vendor name. Problem Description: The HP 81B/82B/41B/42B PCIe FC HBA may display as switches in Data Center Network Manager Switches list. Workaround: Right click the entry in the switch list and select Purge, then click the refresh icon in the task bar. Note: Refer to the Cisco MDS NX-OS release notes for a full list of open and closed caveats. 30 MDS 9000 Series Multilayer Director & Multilayer Fabric Switches Release Notes

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
30
MDS 9000 Series Multilayer Director & Multilayer Fabric Switches Release Notes
HP SPECIFIC KNOWN ISSUES
Problem Description:
Issuing an
“End to End Connectivity”
to the EVA4400/6400/8400 may
crash both EVA controllers at the same time.
Workaround:
None.
Problem Description:
Issuing an fcping to the EVA4400/6400/8400 may crash the EVA
controller
Workaround:
None.
Problem Description:
If it becomes necessary to move an EVA controller port to a different
port on the same C-series switch or to a port on a different C-series switch, the corresponding
controller port may become unavailable.
Workaround:
Restart the EVA controller.
Problem Description:
The P6300/P6500, EVA4400/6400/8400, MSA2000 G1, MSA2000 G2,
and P2000 FC G3 storage arrays may display as servers in the Fabric Manager or Data Center
Network Manager topology diagram or host ports list.
Workaround:
Perform the following steps to change the display of the array from a host icon to
a storage icon.
1.
Log into Fabric Manager or Data Center Network Manager
2.
Under “Physical Attributes” open “End Devices”
3.
Select “
Hosts
” and click on the “Enclosures” tab in the Information Pane
4.
Under “Device Type” for the desired device,
in Fabric Manager
select “
Disk
”
, or for
Data Center Network Manager select “Storage”
5.
Save changes by selecting the “Apply Changes” icon o
n the top left corner of the
Information Panel
Problem Description:
HP C-class fibre channel mezzanine cards may not log into the embedded
C-series fibre channel switch at the supported speed and mode.
Workaround:
Set the internal switch port from auto to the supported speed and mode.
Problem Description:
The SN1000E 16Gb Emulex HBA properties may display as
“Unknown”
vendor in Data Center Network Manager Host Ports list.
Workaround:
Enabling the FDMI in Emulex driver by setting the driver parameter EnableFDMI
to 1 will allow Data Center Network Manager to display the vendor name.
Problem Description:
The
HP 81B/82B/41B/42B PCIe FC HBA
may display as switches
in Data Center Network Manager Switches list.
Workaround:
Right click the entry in the switch list and select Purge, then click the refresh icon
in the task bar.
Note:
Refer to the Cisco MDS NX-OS release notes for a full list of open and closed caveats.