HP Cisco MDS 9020 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rele - Page 55
Symptom, Workaround, show sme internal event-history all, show run
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Caveats Send documentation comments to [email protected] • CSCsq66823 Symptom: On an MDS 9222i switch, an upgrade from SAN-OS Release 3.2(x), Release 3.3(1), or Release 3.3(1a) to SAN-OS Release 3.3(1c) fails when there is an active FC-Redirect configuration (created by SME or DMM applications) on the switch. An active FC-Redirect configuration is defined as: • FC-Redirect configuration for hosts or targets connected locally. • FC-Redirect configuration created by the application running on that switch. If an upgrade is attempted when an active configurations is present, the switch will go into a disruptive upgrade. Workaround: This issue is resolved. • CSCsq69543 Symptom: Fabric Manager does not update PortChannel operation state changes in 5 minutes. Workaround: This issue is resolved. • CSCsq78481 Symptom: During an upgrade, the standby Supervisor module fails. Workaround: This issue is resolved. • CSCsr08325 Symptom: Fabric Manager Web Client shows fabric events with the following description: VSAN ... zone activation success, local switch is 00:00:00:00:00:00:00:00 The switch sends the enhanced zone activation traps with switch WWN of 00:00:00:00:00:00:00:00. This occurs the enhanced zone mode is configured for a VSAN. Workaround: This issue is resolved. • CSCsr18556 Symptom: License records are not removed when a fabric is purged from the database. License information may be incorrect if the same fabric is added back to Fabric Manager at a later time. Workaround: This issue is resolved. • CSCsr15094 Symptom: After issuing the show sme internal event-history all command, some ITLs display the following message: 20) FSM: Transition at 686497 usecs after Wed Jul 2 12:00:57 2008 Previous state: [SME_CPP_TAPE_DRV_WAIT_CPP_SUP_GET_CRYPTO_KEYS] Triggered event: [SME_CPP_TAPE_DRV_EV_SUCCESS] Next state: [SME_CPP_TAPE_DRV_WAIT_CPP_DPP_VERIFY_CTH] Curr state: [SME_CPP_TAPE_DRV_WAIT_CPP_DPP_VERIFY_CTH] If the KMC response comes back with a failure after 10 seconds, it might stop in the CTH state. Workaround: This issue is resolved. • CSCsr18847 Symptom: Port manager failed when issuing the show run command. Workaround: This issue is resolved. OL-17675-02 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b) 55