HP Cisco MDS 9120 Cisco MDS 9000 Family MIB Quick Reference (OL-18087-01, Febr - Page 2
Accessing MIB Variables Through SNMP, Send documentation comments to [email protected]
View all HP Cisco MDS 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Send documentation comments to [email protected] To promote interoperability, cooperating systems must adhere to a common framework and a common language, called a protocol. In the Internet-standard management framework, that protocol is the Simple Network Management Protocol (SNMP). The exchange of information between managed network devices and a robust NMS is essential for reliable performance of a managed network. Because some devices have a limited ability to run management software, most of the computer processing burden is assumed by the NMS. The NMS runs the network management applications, such as Fabric Manager, that present management information to network managers and other users. In a managed device, specialized low-impact software modules, called agents, access information about the device and make it available to the NMS. Managed devices maintain values for a number of variables and report those, as required, to the NMS. For example, an agent might report such data as the number of bytes and packets sent or received by the device or the number of broadcast messages sent and received. In SNMP, each of these variables is referred to as a managed object. A managed object is anything that can be managed, anything that an agent can access and report back to the NMS. All managed objects are contained in the MIB, which is a database of the managed objects. An NMS can control a managed device by sending a request to an agent of that managed device, requiring the device to change the value of one or more of its variables. The managed devices can respond to requests such as set or get. The NMS uses the set request to control the device. The NMS uses the get requests to monitor the device. The set and get requests are synchronous events, meaning the NMS initiates the activity, and the SNMP agent responds. The managed device can send asynchronous events, or SNMP notifications, to the NMS to inform the NMS of some recent event. SNMP notifications (traps or informs) are included in many MIBs and help to alleviate the need for the NMS to frequently send get requests to the managed devices. Accessing MIB Variables Through SNMP You can access the Cisco MIB variables through SNMP. The SNMP system consists of three parts: SNMP manager, SNMP agent, and MIB. You can compile Cisco MIBs with your network management software. If SNMP is configured on a device, the SNMP agent responds to MIB-related queries sent by the NMS. Table 1 describes the SNMP operations. Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA © Cisco Systems, Inc. All rights reserved.