HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1345

Chapter 22 Show Commands show scheduler Send documentation comments to [email protected] show scheduler To display command scheduler information, use the show scheduler command. show scheduler {config | job [name jobname] | logfile | schedule [name schedulename]} Syntax Description config job name jobname logfile schedule name schedulename Displays command scheduler configuration information. Displays job information. Restricts the output to a specific job name. Maximum length is 31 characters. Displays the log file. Displays schedule information. Restricts the output to a specific schedule name. Maximum length is 31 characters. Defaults None. Command Modes EXEC mode. Command History Release 2.0(x) Modification This command was introduced. Usage Guidelines To use this command, the command scheduler must be enabled using the scheduler enable command. Examples The following example displays the command scheduler configuration information. switch# show scheduler config config terminal scheduler enable end The following example displays the command scheduler schedule information. switch# show scheduler schedule configureVsan99 Schedule Name : configureVsan99 User Name : admin Schedule Type : Run once on Tue Aug 10 09:48:00 2004 Last Execution Time: Tue Aug 10 09:48:00 2004 Job Name Status addMemVsan99 Success (0) The following example displays the command scheduler logfile information. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 22-313