HP Cisco MDS 9124 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Rel - Page 37
x45F0 corresponds to HPUX Volume Set Address <VBUS ID: 0xB, Target ID: 0xE, LUN: 0x0>.
View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Caveats Send documentation comments to [email protected] Note This applies only to Terminal Server running in Application Mode. This issue does not affect users running a Terminal Server or Remote Desktop session in Remote Administration mode. Workaround: This issue is resolved. • CSCso63465 Symptom: FCP-CMD (for example, Inquiry) frames targeted to LUN 0x45F0 or LUN 0x50F0 are dropped by an MDS switch when traffic flows (egresses) through Generation 2 modules. LUN 0x45F0 corresponds to HPUX Volume Set Address . Workaround: This issue is resolved. • CSCsq54455 Symptom: On a DS-X9032 module where the SRAM parity error was seen, the SRAM parity error exceptions were logged continuously. Workaround: This issue is resolved. • CSCsq57352 Symptom: After upgrading from Fabric Manager Release 3.0(2a) to Fabric Manager Release 3.2(3a), the Fabric Manager client fails to reuse the map layout files produced by Release 3.0(2a). Renaming the map layout files will make them compatible with Fabric Manager Release 3.2(3a). Workaround: This issue is resolved. • CSCsq66823 Symptom: On an MDS 9222i switch, an upgrade from SAN-OS Release 3.2(x), Release 3.3(1a), or Release 3.3(1c) to SAN-OS Release 3.3(1c) fails when there is an active FC-Redirect configuration (created by SME or DMM applications) on the switch. An active FC-Redirect configuration is defined as: • FC-Redirect configuration for hosts or targets connected locally • FC-Redirect configuration created by the application running on that switch. If an upgrade is attempted when an active configurations is present, the switch will go into a disruptive upgrade. Workaround: This issue is resolved. • CSCsr90831 In rare instances, the following Generation 2 modules and MDS switches might reload: • MDS 900012-port 4-Gbps Fibre Channel switching module • MDS 9000 24-port 4-Gbps Fibre Channel switching module • MDS 9000 48-port 4-Gbps Fibre Channel switching module • MDS 9000 4-port 10-Gbps Fibre Channel switching module • MDS 9124 Multilayer Fabric Switch • Cisco Fabric Switch for HP c-Class BladeSystem • Cisco Fabric Switch for IBM BladeCenter OL-14116-11 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(3) 37