HP Cisco MDS 9124 Cisco MDS 9200 Series Hardware Installation Guide (OL-16188- - Page 68
Installing Front Rack-Mount Brackets for Cabinets with 26 Inches or Greater of Rail Spacings
![]() |
View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Installing the Switch in a Cabinet with Insufficient Front Clearance Chapter 2 Installing the Cisco MDS 9200 Series The rack-mount kit provided with the switch contains the items listed in Table 2-1. If you do not find all of the parts listed in Table 2-1, you may have an older version of the rack-mount kit, which only included the front rack-mount brackets. If this is the case, you can either install the switch in the rack with just the front rack-mount brackets, or contact your customer service representative for a current version of the rack-mount kit. Note If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml Installing Front Rack-Mount Brackets for Cabinets with 26 Inches or Greater of Rail Spacings Before installing the switch into the cabinet, the front rack-mount brackets for the Cisco MDS 9200 Series must be installed onto the switch. To install the brackets for cabinets with front-mounting rail to rear-mounting rail spacing greater than or equal to 26 inches, follow these steps. Step 1 Install the front rack-mount brackets as follows: a. Position a front rack-mount bracket against the chassis and align the screw holes as shown in Figure 2-7. Then attach the front rack-mount bracket to the chassis with six of the M4 screws. b. Repeat with the other front rack-mount bracket on the other side of the switch. Figure 2-7 Attaching Front Rack-Mount Bracket to the Cisco MDS 9200 Series 1 2 MDS 9216i 3 4 5 6 7 8 9 10 11 12 13 14 LINK GE1 LINK GE2 116891 12 1 Front rack-mount bracket 2 Screws, M4 2-12 Cisco MDS 9200 Series Hardware Installation Guide OL-16188-01
![](/manual_guide/products/hewlettpackard-aj732a-cisco-mds-9200-series-hardware-installation-guide-ol1618801-2008-17ad57d/68.png)