HP Cisco MDS 9124 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 914

Auto-learning Chapter 46 Configuring Port Security Send documentation comments to [email protected] Step 1 Step 2 Expand a VSAN and select Port Security in the Logical Domains pane. You see the port security configuration for that VSAN in the Information pane. Click the Violations tab. You see the port security violations for that VSAN. Auto-learning This section contains the following topics: • About Enabling Auto-learning, page 46-14 • Enabling Auto-learning, page 46-14 • Disabling Auto-learning, page 46-15 • Auto-Learning Device Authorization, page 46-15 • Authorization Scenarios, page 46-16 About Enabling Auto-learning The state of the auto-learning configuration depends on the state of the port security feature: • If the port security feature is not activated, auto-learning is disabled by default. • If the port security feature is activated, auto-learning is enabled by default (unless you explicitly disabled this option). Tip If auto-learning is enabled on a VSAN, you can only activate the database for that VSAN by using the force option. Enabling Auto-learning To enable auto-learning using Fabric Manager, follow these steps: Step 1 Expand a VSAN and select Port Security in the Logical Domains pane. You see the port security configuration for that VSAN in the Information pane (see Figure 46-9). Figure 46-9 Port Security Configuration Step 2 Click the Actions tab. 46-14 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x