HP Cisco MDS 9140 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rele - Page 43
Availability of F Port Trunking and F Port Channels, Reserved VSAN Range and Isolated VSAN Range
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Limitations and Restrictions Send documentation comments to mdsfeedback-doc.com. > no destination-profile testProfile transport-method email > destination-profile testProfile transport-method http > destination-profile testProfile http https://xyz.abc.com > destination-profile testProfile alert-group all > transport email smtp-server 64.104.140.134 port 25 use-vrf management > transport email from [email protected] > enable > commit When you attempt to apply these commands in the ASCII configuration, the following commands fail: > no destination-profile testProfile transport-method email > destination-profile testProfile transport-method http > destination-profile testProfile http https://xyz.abc.com To work around this issue, issue these commands after the commit command. Availability of F Port Trunking and F Port Channels Trunking F ports and trunking F port channels are not supported on the following MDS 9000 components: • DS-C9134-K9, Cisco MDS 9134 Multilayer Fabric Switch, if NPIV is enabled and the switch is used as the NPV core switch • DS-C9124-K9, Cisco MDS 9124 Multilayer Fabric Switch, if NPIV is enabled and the switch is used as the NPV core switch Trunking F ports, trunking F port channels and regular F port channels are not supported on the following MDS 9000 components: • DS-C9216i-K9, Cisco MDS 9216i Multilayer Fabric Switch • DS-X9016, Cisco MDS 9000 2-Gbps16-Port Fibre Channel Switching Module • DS-X9032, Cisco MDS 9000 2-Gbps 32-Port Fibre Channel Switching Module • DS-X9032-14K9, Cisco MDS 9000 14/2-Port Multiprotocol Services Module (MPS-14/2) For configuration information, refer to the "Configuring Trunking" section in the Cisco MDS 9000 Family CLI Configuration Guide. Reserved VSAN Range and Isolated VSAN Range Guidelines On an NPV switch with a trunking configuration on any interface, or on a regular switch where the feature fport_channel_trunk command has been issued to enable the F PortChannel feature, follow these configuration guidelines for reserved VSANs and the isolated VSAN: OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 43