HP Cisco MDS 9140 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 1205

Chapter 64 Configuring Call Home E-Mail Options Send documentation comments to [email protected] E-Mail Options You can configure the from, reply-to, and return-receipt e-mail addresses. While most e-mail address configurations are optional, you must configure the SMTP server address for the Call Home functionality to work. Configuring General E-Mail Options To configure general e-mail options using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Select a switch in the Fabric pane. Expand Switches, expand Events, and select Call Home in the Physical Attributes pane. You see the Call Home information in the Information pane. Click the Email Setup tab. Figure 64-11 Call Home Email Setup Tab Step 4 Step 5 Step 6 Step 7 Select a switch in the Information pane. Enter the general e-mail information. Enter the SMTP server IP address type, IP address or name, and port. Click the Apply Changes icon to update the e-mail options. Periodic Inventory Notification You can configure the switch to periodically send a message with an inventory of all the software services currently enabled and running on the switch along with hardware inventory information. The inventory is modified each time the switch is restarted nondisruptively. By default, this feature is disabled in all switches in the Cisco MDS 9000 Family. When you enable this feature without configuring an interval value, the Call Home message is sent every 7 days. This value ranges from 1 to 30 days. To enable periodic inventory notification in a Cisco MDS 9000 Family switch using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Select a switch in the Fabric pane. Expand Switches, expand Events, and select Call Home in the Physical Attributes pane. You see the Call Home information in the Information pane. Click the Periodic Inventory tab. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 64-11