HP Cisco MDS 9216 HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE - Page 13
Fibre Channel switches, Operating system software and iSCSI Initiator support - cisco mds 9216i multilayer fabric switch
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Fibre Channel switches The C-Series IP Storage Services Modules (IPS-4, IPS-8), and Multi-protocol Services Module (14/2) are supported with the following HP C-Series Product Line switches: • MDS 9216, MDS 9216A, MDS 9216i Multilayer Fabric Switches • MDS 9506, MDS 9509, MDS 9513 Multilayer Director Switches NOTE: The MDS 9216i switch contains two embedded IP ports. Operating system software and iSCSI Initiator support Refer to the HP StorageWorks C-Series iSCSI support tables located at: http://www.hp.com/support/manuals In the Storage section, select the SAN Infrastructure link. Go to the C-Series section and select the link for the Cisco MDS9216i Multilayer Fabric Switch. C-Series management software The following management software is supported: • Cisco Fabric Manager • Cisco Device Manager • CLI HP network teaming HP NIC teaming is supported with the Windows operating system only. Network interface controllers (NIC) All NICs supported by HP are supported for this product. For optimal performance, HP recommends that Gigabit Ethernet NICs be used. Multi-pathing Multi-pathing is supported on EVA4000/6000/8000 only in a Windows environment using the Microsoft Multipath I/O driver (MPIO), supported with iSCSI. Without multi-path capabilities, the iSCSI initiator can only access one path of the storage controllers, which disables controller failover protection. C-Series iSCSI 13