HP Cisco MDS 9216i HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7P - Page 22
The Log On to Target window appears, Available targets-Inactive status
![]() |
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
The iSCSI Initiator rescans the connection to the storage port. Upon successful rescan, the iqn of the storage controller port appears under Name with a status of Inactive (Figure 10). Figure 10 Available targets-Inactive status 2. Select the storage controller Name and then click Log On. The Log On to Target window appears (Figure 11). 22
![](/manual_guide/products/hewlettpackard-aj732a-hp-storageworks-cseries-iscsi-configuration-guide-aarw7pete-2006-9604388/22.png)
The iSCSI Initiator rescans the connection to the storage port. Upon successful rescan, the iqn of the
storage controller port appears under
Name
with a status of Inactive (
Figure 10
).
Figure 10 Available targets—Inactive status
2.
Select the storage controller Name and then click
Log On
.
The Log On to Target window appears (
Figure 11
).
22