HP Cisco MDS 9216i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 624
interface fc, no fcdomain rcf-reject vsan
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 624 highlights
interface fc Chapter 8 Fibre Channel Commands Send comments to [email protected] interface fc To configure a Fibre Channel interface on a Cisco Nexus 5000 Series switch, use the interface fc command. The interface fc command enters interface configuration mode, which includes five commands (each with a no form). To revert to defaults, use the no form of the command. interface fc slot/port channel-group {group-id [force] | auto} fcdomain rcf-reject vsan vsan-id fcsp {auto-active | auto-passive | on | off} [timeout-period] fspf {cost link-cost vsan vsan-id | dead-interval seconds vsan vsan-id | hello-interval seconds vsan vsan-id | passive vsan vsan-id | retransmit-interval seconds vsan vsan-id} switchport no interface fc slot/port no channel-group {group-id [force] | auto} no fcdomain rcf-reject vsan vsan-id no fcsp {auto-active | auto-passive | on | off} no fspf {cost link-cost vsan vsan-id | dead-interval seconds vsan vsan-id | hello-interval seconds vsan vsan-id | passive vsan vsan-id | retransmit-interval seconds vsan vsan-id} switchport Syntax Description slot/port channel-group group-id force auto fcdomain rcf-reject vsan vsan-id fspf cost link-cost dead-interval seconds hello-interval seconds passive retransmit-interval seconds Specifies a slot number and port number. Adds to or removes from a Port Channel. Specifies a Port Channel group number from 1 to 128. Forcefully adds a port. Enables autocreation of port channels. Enters the interface mode. Configures the rcf-reject flag. Specifies the VSAN ID. The range is 1 to 4093. Configures FSPF parameters. Configures FSPF link cost. The range is 1 to 65535. Configures FSPF dead interval in seconds. The range is 2 to 65535. Configures FSPF hello-interval. The range is 1 to 65535. Enables or disables FSPF on the interface. Configures FSPF retransmit interface in seconds. The range is 1 to 65535. Command Default Disabled. Command Modes Configuration mode 8-90 Cisco Nexus 5000 Series Command Reference OL-16599-01