HP Cisco MDS 9222i Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Re - Page 34
When a Cisco Fabric Switch for HP c-Class BladeSystem or Cisco Fabric Switch for, Symptom, Workaround
View all HP Cisco MDS 9222i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Caveats Send documentation comments to [email protected] Symptom: When NPV is enabled, IP access list commands are not accessible. Workaround: This issue is resolved. • CSCsz40628 Symptom: An Inter-Switch Link (ISL) does not come up after one switch reloads. Workaround: This issue is resolved. • CSCsz70307 Symptom: While Fabric Manager discovers the fabric, SNMP fails and the switch reloads. The HBAs of the end devices in the fabric have Fabric-Device Management Interface (FDMI) enabled. Workaround: This issue is resolved. • CSCsz74907 Symptom: In very rare circumstances, the zone server might fail due to a heartbeat failure. Workaround: This issue is resolved. • CSCsz75692 Symptom: When a Cisco Fabric Switch for HP c-Class BladeSystem or Cisco Fabric Switch for IBM BladeCenter reloads following the system startup-config init command, the switch does not auto boot, but remains at the loader prompt. The command erroneously erases the startup configuration from the boot flash. Workaround: This issue is resolved. • CSCsz84022 Symptom: The TPC application cannot discover the MDS 9509 switch when it is connected to an MDS 9020 switch. Workaround: This issue is resolved. • CSCsz95999 Symptom: A kernel failure in the Mgmt0 driver caused the MDS 9222i switch to reboot Workaround: This issue is resolved. • CSCta08796 Symptom: A memory leak caused the port manager to fail and put the ports in a hardware failure state. Workaround: This issue is resolved. • CSCta15575 Symptom: The SystemName property on the CIM Server is returning the wrong values for N port and F port. Workaround: This issue is resolved. • CSCta28642 Symptom: SNMP should gracefully handle timeouts caused by port initialization. Workaround: This issue is resolved. • CSCta34629 Symptom: The system manager core server does not clean up the core files on the MDS 9513 switch. Workaround: This issue is resolved. Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(4) 34 OL-14116-12