HP Cisco MDS 9222i Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Re - Page 23

New Features in Cisco MDS SAN-OS Release 3.2(1a) Send documentation comments to [email protected] - The EPLD version on the SSM is at 0x07 or higher. Use the show version module slot epld CLI command to determine your EPLD version. Refer to the Cisco MDS 9000 Family Release Notes for Cisco MDS 9000 EPLD Images to upgrade your EPLD image. - Refer to the Cisco MDS Storage Services Module Interoperability Support Matrix and to the "Managing Modules" chapter in the Cisco MDS 9000 Family CLI Configuration Guide, Release 3.x for information on downgrading your SSM. New Features in Cisco MDS SAN-OS Release 3.2(1a) Cisco MDS SAN-OS Release 3.2(1a) does not include any new features, but it provides all the new features of Cisco MDS SAN-OS Release 3.2(1). This section briefly describes those features. For detailed information about the features listed, refer to the Cisco MDS 9000 Family CLI Configuration Guide and the Cisco MDS 9000 Family Fabric Manager Configuration Guide. For information about new CLI commands associated with these features, refer to the Cisco MDS 9000 Family Command Reference. The "New and Changed Information" section in each of these books provides a detailed list of all new features and includes links to the feature description or new command. Cisco MDS 9134 Multilayer Fabric Switch The Cisco MDS 9134 Multilayer Fabric Switch is a 32-port 1-, 2-, and 4-Gbps autosensing Fibre Channel and 2-port 10-Gbps switch. It features On-Demand Port Activation Licensing. By default, the first 24 ports are licensed. An additional license is required for the remaining 8 ports. The 210-Gbps ports are not licensed by default, but require a separate license. Cisco MDS 92221 Multiservice Switch The Cisco MDS 9222i Multiservice Modular Switch offers eighteen 4-Gbps Fibre Channel ports and four Gigabit Ethernet IP storage services ports, and a modular expansion slot to host Cisco MDS 9000 Family Switching and Services Modules. The MDS 9222i switch provides the cryptographic engine used by Cisco Storage Media Encryption. The Cisco MDS 9222i also supports non-disruptive, in services software upgrades (ISSU). Cisco MDS 9000 18/4-Port Multiservice Module (MSM-18/4) The Cisco MDS 900018/4-Port Multiservice Module (MSM-18/4) offer eighteen 1-, 2-, and 4-Gbps Fibre Channel ports and four Gigabit Ethernet IP storage services ports. Its multiprotocol capabilities integrate in a single-form-factor Fibre Channel, Fibre Channel over IP (FCIP), Small Computer System Interface over IP (iSCSI), IBM Fiber Connectivity (FICON), FICON Control Unit Port (CUP) management, and switch cascading. The Cisco MDS-18/4 Module can be used with the Cisco MDS 9200 Series of Multilayer Fabric Switches and the Cisco MDS 9500 Series of Multilayer Directors. Note The MSM-18/4 module supports both the IP Storage (IPS) and Storage Services Interface (SSI) images. As of Cisco SAN-OS 3.2(1a), the MSM-18/4 module does not support any SSI or iSAPI application. OL-14116-02 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1a) 23