HP Cluster Platform Hardware Kits v2010 Tab Mount Cable Management Bracket Ins - Page 3
Audience, 1.2 Documentation Resources, 1.3 Kit Description, Note, 1.4 Kit Contents, age/racks
View all HP Cluster Platform Hardware Kits v2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
1 Preparing for Installation 1.1 Audience This guide is intended for HP service representatives and other persons trained to install hardware options in the HP 10000 and 15000 series racks. Such persons are expected to understand the hazards of working in this environment and to take suitable precautions to minimize danger to themselves and others. 1.2 Documentation Resources You can download the documentation for components referenced in this installation guide from the following locations: • HP 10000-series rack (Documentation option): http://h18004.www1.hp.com/products/servers/proliantstorage/racks • HP Cluster Platform: http://www.hp.com/techservers/clusters/xc_clusters.html 1.3 Kit Description The cable management bracket described in this manual is designed to align and support cables that lead from a cluster's system interconnect to the PCI interface card installed in each server (node). The bracket provides strain relief for the PCI port and ensures a good connection. It also ensures the correct bend radius for the cable and provides attachment points for cable routing and cable management. A kit is required for every server that contains a PCI interface card for the system interconnect. Note This bracket is designed to support different types of cables, from 5/16-inch (7.9-mm) minimum diameter to 5/8-inch (15.9-mm) maximum diameter. Consult the documentation supplied with your cluster before installing the brackets and routing the cables. 1.4 Kit Contents The kit contains the following components: • The bracket shown in Figure 1-1. Preparing for Installation 1-1