HP Color LaserJet Enterprise CP5520 HP Color LaserJet Enterprise CP5520 - Soft - Page 170
Remote firmware update using HP Web Jetadmin 10.x, Device Management, All Devices, Quick Device
View all HP Color LaserJet Enterprise CP5520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Remote firmware update using HP Web Jetadmin 10.x NOTE: HP Web Jetadmin can be configured to get firmware details from hp.com directly. Use Tools, Options, Shared, Network, HTTP to add HTTP proxy details (if needed) and to enable "Allow download". "Allow download" is required for HP Web Jetadmin to communicate with the Internet. Once these settings are enabled, HP Web Jetadmin may be able to get firmware listing and firmware image files directly from HP.com if this is allowed on the network where HP Web Jetadmin is running. 1. Start Web Jetadmin 10.x 2. From the Device Management section, select All Devices (or the appropriate device group). An All Devices list will appear in the center window. 3. Find your product in the list, or type the IP address of the product in the Quick Device Discovery section in the lower-left of the screen (this will highlight your product in the device list). You can sort the product list by clicking on a column name at the top. 4. If your product list is sorted my model number, you may select multiple products with the same model number by Control-Click or Shift-Click. 5. Right-click on the product and select Upgrade firmware.... 6. An Upgrade Firmware window will appear. Select Device firmware and then click Next. 7. A list of available firmware will appear. If the correct version is listed, click Next, and the upgrade process will start. If the correct firmware version does not appear on the list, perform a manual upload. New firmware may be available on an FTP site prior to appearing on hp.com. The instructions below allow you to upload a RFU file from your local PC to WJA 10. Perform a manual firmware upload. 1. Click on Firmware/Firmware Repository in the Device Management pane. 2. A Firmware Repository window displays in the center of the screen 3. Click on Upload in the upper-right of the window. 4. Browse to the .rfu file on your computer. 5. Click Upload. 6. Once the .rfu file is uploaded, perform steps 2 through 6 in the remote firmware update procedure. NOTE: Do not turn printer off during the update process! When the update process is complete, the printer will automatically reboot. If the firmware update process fails, Web JetAdmin will provide notification with a page (screen) of information regarding the reason(s) for failure. A link will be provided to attempt the process again. 154 Chapter 6 Engineering Details ENWW