HP Color LaserJet Enterprise flow MFP M880 User Guide 1 - Page 53
Step six: Con the default staple location, Stapler/Stacker Settings, Hole Punching
View all HP Color LaserJet Enterprise flow MFP M880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
● Stapler/Stacker Settings ● Hole Punching 3. Select a hole punch location from the list of options, and then touch the Save button. The following hole punch options are available for either a 2/3 Hole Puncher or 2/4 Hole Puncher: Hole punch location None Two left or top Two left Two right Two top Two bottom Three left Three top Three right Three top Three left or top Four left Four right Four top Four left or top 2/3 Hole Puncher 2/4 Hole Puncher NOTE: Not all options are available. Available options depend on whether the hole punch accessory is a 2/3 or 2/4 hole puncher. NOTE: To use the hole puncher, load Letter or A4-size paper with the long edge of the paper along the right edge of the tray (long-edge feed). Step six: Configure the default staple location 1. From the Home screen on the product control panel, scroll to and touch the Administration button. 2. Open the following menus: ● Stapler/Stacker Settings ● Stapling 3. Select a staple location from the list of options, and then touch the Save button. The following staple options are available: ● None ● Top left ENWW Install or replace a stapler/stacker or stapler/stacker with hole punch accessory for the HP LaserJet 45 Enterprise M806 and HP LaserJet Enterprise flow MFP M830