HP Color LaserJet Pro M153-M154 Getting Started Guide - Page 1

Color LaserJet Pro M153-M154 Getting Started Guide IMPORTANT: First, follow Steps 1 - 2 on the printer hardware setup poster, then continue with Step 3. www.hp.com/support/ljM153 www.register.hp.com English 1 Français 4 Español 7 Português.......... 10 13 3. Initial setup on the control panel At the printer control panel, check the LED status before beginning software installation. 4. Select the connection method U SB connection directly between the printer and the computer Use an A-to-B type USB cable. Windows 1. Do not connect the USB cable before installing the software. The installation process prompts to connect the cable at the appropriate time. If the cable is already connected, restart the printer when installation prompts to connect the cable. 2. Continue to "5. Download and install the software." OS X 1. For OS X, connect the USB cable between the computer and the printer before installing the software. 2. Continue to "5. Download and install the software." Wireless network connection (wireless models only) Before starting the installation, verify that the wireless access point is working correctly. Make sure that the printer, router, and computer are all turned on and that the computer is connected to the same wireless network that the printer will be connected to. 1. Place the CD in the CD-ROM drive, navigate to setup.exe and double click. When the Printer connections dialog appears, choose Make a wireless connection to the device. 2. Follow the on-screen instructions. 3. Select the printer detected by the software. If the printer cannot be detected by the installer, manually input the printer's IP address to continue the installation. NOTE: Print a configuration page to find the printer's IP address. At the printer control panel, press and hold the Resume button for two seconds until the Ready LED begins blinking, and then release the Resume button to print the configuration page. The IP address is listed on the configuration page in the Network Information section. Wired Ethernet network connection ( Optional) Use a standard network cable. 1. Connect the network cable to the printer and to the network. Wait a few minutes for the printer to acquire a network address. 2. Continue to "5. Download and install the software." Manually configure the IP address See the printer user guide for information on how to manually configure the IP address www.hp.com/support/ljM153. 1