HP DL360 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 68
Switches, ROM-Based Setup Utility RBSU.
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
LEDs, Switches, and Jumpers Switches The system board contains three switchbanks that may need to be modified to set configuration or to trigger special functions. These switches can cause problems if they are not correctly set. When adding or removing a component or changing a security feature, the server must be reconfigured to recognize these changes. If the system configuration is incorrect, the server may not work properly, and you may receive error messages on the screen. IMPORTANT: Reserved switches are provided for use by HP authorized service providers only and should not be changed from the indicated default settings. Refer to Figure 5-3 and Table 5-3 for locations on the system board of the switches. The following subsections provide reference information about setting the system board switches and jumpers, which is part of the reconfiguration process, along with running the ROM-Based Setup Utility (RBSU). HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide 5-5