HP DL385 HP Insight Software Installation Checklist - Page 31
Directory configuration parameters
UPC - 884420300588
View all HP DL385 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Bay EBIPA enabled (Y/N) Possible value EBIPA address Possible value Description parameter 8 Select the checkbox The IP address to enable EBIPA or where ### ranges assigned to the leave it cleared to from 0 to 255 device bay if EBIPA disable EBIPA for the is enabled bay. Directory configuration parameters Use the Directory Settings screen to set directory access for the currently selected enclosures. Record the configuration parameters in the following table. Table 4-9 Onboard Administrator Directory configuration parameters Parameter Enable LDAP authentication Value Enable local users Directory server address Directory server SSL port Search context 1-3 Use Microsoft®Windows NT® account name mapping (DOMAIN\username) Possible value Description Yes or No Choice to enable or disable LDAP authentication. Yes means LDAP authentication is enabled. No means LDAP authentication is not enabled. Yes or No Choose to enable or disable local users. where ### ranges from 0 to 255 or DNS name of the directory server or the name of the domain The IP address, DNS name, or domain name of the directory service 1-65535 The port used for LDAP communications Maximum of 128 characters Searchable paths used to locate the user when the user tries to authenticate using directory services Yes or No - Network configuration parameters Use the Onboard Administrator network settings screen to modify network configuration parameters for the active HP Onboard Administrator. Select Dynamic Host Configuration Protocol (DHCP) or Static Internet Protocol (IP). Enter the DHCP or static IP configuration parameters for each active Onboard Administrator. Record the configuration parameters in the following table. Table 4-10 Onboard Administrator network configuration parameters Parameter IP address Subnet mask Gateway DNS server 1 DNS server 2 Value Possible value Description where ### Static IP address (leave blank ranges from 0 to 255 for DHCP) where ### Mask numbers (leave blank for ranges from 0 to 255 DHCP) where ### - ranges from 0 to 255 where ### - ranges from 0 to 255 where ### - ranges from 0 to 255 Directory configuration parameters 31