HP DL760 Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 123
NT Event ID: 1181 Hex, 0x8435049D cpqsvmsg.dll
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
User action: None Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The Management processor is ready after a successfull reset" NT Event ID: 1181 (Hex) 0x8435049D (cpqsvmsg.dll) Log Severity: Warning (3) Log Message: The Management Processor has not reset successfully and is not operational. The data contains the error code. SNMP Trap: cpqHeManagementProcFailedReset - 6063 in CPQHLTH.MIB Symptom: The Management processor failed reset. The management processor was not successfully reset and is not operational. User action: Reset the management procesessor again or re-flash the management processor firmware. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: The Management processor failed reset. NT Event ID: 1182 (Hex)0x4435049EL Log Severity: Informational Log Message: USB storage device '%5' attached. The data contains the error code. SNMP Trap: 1008 in CPQSTDEQ.MIB Symptom: The USB key is attached to the server. User Action: None required. Supporting SNMP Trap Data: • sysName, • cpqHoTrapFlags • cpqSeUSBDeviceType • cpqSeUSBDeviceName Supporting SNMP Trap Description: This trap is sent when a USB storage device has been attached. Symbolic Name: CPQ_STD_USB_DEV_ATTACHED NT Event ID: 1183 (Hex)0x4435049FL Log Severity: Informational Log Message: USB storage device '%5' removed. The data contains the error code. SNMP TRAP: 1009 in CPQSTDEQ.MIB Symptom: The USB key has been removed from the server. User Action: None required. Supporting SNMP Trap Data: Server agents 123