HP DL760 SCO Operating System support of HP StorageWorks Modular Smart Array - Page 15
Configuring logical volumes on the MSA
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Configuring logical volumes on the MSA The LUNs on MSA1000/MSA1500 can be configured using Command Line Interface (CLI) or the ACU utility. 3 Item Creating LUNs using CLI Creating LUNs using ACU Comments 3 HP StorageWorks Modular Smart Array (MSA) Command Line Interface document available at http://h20000.www2.hp.com/bc/docs/support/SupportManual/c001498 49/c00149849.pdf provides information to use the Command Line Interface. In order to use the CLI interface, a serial connection needs to be setup to the MSA1000/MSA1500 controller. Refer to the CLI setup section in the Interface document. Create the LUNs as described in the"Creating LUNs" section in the Interface document. The Array Configuration Utility can be used to create the LUNs on a MSA. This utility is available on a bootable CD that is shipped with MSA1000/MSA1500. Boot the ProLiant server with the MSA attached using this CD. Follow the on-screen instructions to create LUNs. 15