HP Dc5750 Computer Setup (F10) Utility Guide - dc5750 Models - Page 12
SATA 1 and 3, SATA 4, SATA 5, DPS Self-Test, Boot Order, Shortcut to Temporarily Override Boot Order
UPC - 883585056446
View all HP Dc5750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Table 3 Computer Setup-Storage (continued) NOTE Advanced operating systems like Windows may reenable the channel. SATA 1 and 3 Allows you to enable or disable DOS and boot accesses to the Secondary channel of the first SATA controller. This feature only applies when SATA Emulation = IDE. NOTE Advanced operating systems like Windows may reenable the channel. SATA 4 (some models) Allows you to enable or disable DOS and boot accesses to the Primary channel of the second SATA controller. This feature only applies when SATA Emulation = IDE. NOTE Advanced operating systems like Windows may reenable the channel. SATA 5 (some models) Allows you to enable or disable DOS and boot accesses to the Secondary channel of the second SATA controller. This feature only applies when SATA Emulation = IDE. NOTE Advanced operating systems like Windows may reenable the channel. DPS Self-Test Boot Order Allows you to execute self-tests on ATA hard drives capable of performing the Drive Protection System (DPS) self-tests. NOTE This selection will only appear when at least one drive capable of performing the DPS self-tests is attached to the system. Allows you to: ● Specify the order in which attached devices (such as a USB flash media device, diskette drive, hard drive, optical drive, or network interface card) are checked for a bootable operating system image. Each device on the list may be individually excluded from or included for consideration as a bootable operating system source. ● Specify the order of attached hard drives. The first hard drive in the order will have priority in the boot sequence and will be recognized as drive C (if any devices are attached). NOTE MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has started. Shortcut to Temporarily Override Boot Order To boot one time from a device other than the default device specified in Boot Order, restart the computer and press F9 when the monitor light turns green. After POST is completed, a list of bootable devices is displayed. Use the arrow keys to select the preferred bootable device and press Enter. The computer then boots from the selected non-default device for this one time. 6 Computer Setup (F10) Utility ENWW