HP Dc7600 Hardware Reference Guide - dc7600 CMT - Page 37
Drive Positions, Computer, Setup F10 Utility, Guide, Documentation and Diagnostics, Computer Setup F10
View all HP Dc7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Hardware Upgrades 15. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD for instructions about using Computer Setup. Drive Positions Desktop and Minitower Drive Positions 1 Three 5.25-inch, half-height bays for optional drives (an optional hard drive mounting bracket for these drive bays is available from HP) 2 One standard 3.5-inch, one-third height bay (1.44-MB diskette drive shown)* 3 Two internal 3.5-inch, one-third height bays for hard drives *Depending on the computer configuration, you may have a bezel blank in this position. If you do not have a drive in this slot, you may choose to install a 3.5-inch device (such as a diskette drive, hard drive, or Zip drive) later on. To verify the type and size of the storage devices installed in the computer, run Computer Setup. Refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD for more information. Hardware Reference Guide www.hp.com 2-21