HP DesignJet T940 Security Features - Page 27
Jetdirect Security Wizard HP T9x0-T15x0-T25x0-T3500- Wide XL, Basic, Enhanced, Custom, Hide IP
View all HP DesignJet T940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
HP DesignJet Printers Security Settings Jetdirect Security Wizard (HP T9x0-T15x0-T25x0-T3500-PageWide XL) The HP Jetdirect Security Configuration Wizard enables you to configure security settings for HP Jetdirect print server management. There are 3 levels of Network Security that can be set: Security level Details Basic Configure an admin password that is shared on other tools such as Telnet and SNMPv1/v2. Enhanced Disable unsecure management protocols (FTP, Telnet, RCFG, SNMP v1/v2c). Enable SNMPv3. Enable SNMPv1/v2 read only access. Custom Manually adjust all the settings. Hide IP from front panel Some printers include an option in the Service Menu, accessible with the help of an HP Support agent only, that enables you to hide all IP information from the printer's front panel. This prevents that people physically around the printer could obtain the IP and connect to it. 2.3 Data security: encrypted communications IPSec A Firewall or IP Security (IPsec) policy enables you to control traffic to or from the device by using network-layer protocols. Either a firewall or IPsec/firewall pages will appear, depending on whether IPsec is supported by the print server and device. If IPsec is not supported, firewall pages will be displayed and a firewall policy can be configured. NOTE: Before you enable a firewall or IPsec policy, you should make sure that access to your configuration management settings is secured (for example, through an administrator password). This will ensure that your policy is not easily disabled through Telnet, control panel menus, or other management tools. Firewall. Use this page to view or configure a firewall policy. A firewall policy consists of up to 10 rules, where each 27