HP Designjet 2500/3500cp HP DesignJet 2500 and 2000CP Printer Quick Reference - Page 92
within an ink system are not all of the same type UV Pigmented or
View all HP Designjet 2500/3500cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
MIO error handshake Mispositioned Reload roll Mispositioned Reload sheet MISSING INK SYSTEM Install→ Mixed ink system → You configured the modular interface incorrectly. Press the Enter key to clear the message from the front panel. Check the handshake settings in the printer's front panel, in the hardware configuration, and in your application software configuration to make sure they are compatible with one another. The roll media is mispositioned. Remove and reload the roll. The sheet media is mispositioned. Remove and reload the sheet. One or more ink systems are missing. Press ↓ or the Replace Ink System key to install the ink systems in order to print with your printer. At power-on or after the ink systems have been serviced, the printer has detected components of different ink system types (for example, Imaging and UV Pigmented). Printing will be disabled until the ink systems are all of the same type. The flashing squares indicate which ink systems need checking. The error may be because the printhead, printhead cleaner and ink cartridge within an ink system are not all of the same type (UV Pigmented or Imaging) or that entire ink systems are of different types. Press ↓ to continue, to check the ink systems. See 74, If You Have Problems Reseating a Printhead. 92