HP Designjet 90 HP Designjet 30/90/130 Printing Guide [EFI Designer Edition RI - Page 2
Preferences > Printer > Calibration., Preferences > Color, Paper name, Print Resolution
View all HP Designjet 90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
1. Load your paper into the printer and launch the EFI Designer Edition software. The color calibration must be performed whenever: • A printhead is changed. • A new combination of paper type and print mode is loaded which has not been previously calibrated, see note. • The environmental conditions change (for example, temperature or humidity) • You note deterioration in the quality of prints. Note: To check if your media type and print mode have already been calibrated: Preferences > Printer > Calibration. 2. To start the calibration process, first, go to Preferences > Color: • Paper name: Select the paper type that is loaded on the printer and print quality in which you are going to print. • Print Resolution: Select the quality in which you are going to print. 2