HP Designjet 9000s HP Designjet 8000s, 9000s, and 10000s Air Purifier System - - Page 11
Unpacking and installation, Box content - inks
View all HP Designjet 9000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1.2 Unpacking and installation Note: When the APS is installed, allow adequate space for exhaust hoses from the printer. Locate these hoses and the APS so that they do not pose a trip hazard or interfere with the operation of the printer such as loading and unloading media, replacing Ink Cartridges, inspecting and replacing the Waste Ink Bottle. Note: Allow adequate space around the APS to remove and replace the filter elements. Note: Do not install the APS in an area where it receives direct airflow from air conditioners, heaters, or ventilators. Note: Proceed as follows when unpacking and installing the APS: - Do not lift the APS off the wooden pallet or remove from the transport packaging until you reach the place of installation. Carefully remove the packaging. - Check the completeness of the delivery based on the packing list. Also check the complete delivery for external damages, such as may have occurred in transit. - Move the APS on its casters until you reach the place of installation - Install the APS on a level, firm surface. - Secure the APS against unintended rolling by pressing the brakes on the casters. - The APS must be placed in such a way that the exhaust grid can lead the filtered air back into the working room. - Secure the APS with placing of the adjustment feet to prevent the APS for uninten- tional tilting (according EN 60950-1 test of stableness) to the side. In the bottom of the APS housing, 4 nuts are fastened for placing of the adjustment feet. To be able to screw the adjustment feet into the 4 nuts it is necessary to remove the 4 exi- sting screws M10. The positioning of the adjustment feet has to be according to the underground in such a way that the APS is placed on an even and firm underground and the exi- sting wheels are not relieved. 1.3 Box content When you receive the APS please check in detail the box content. The regular scope of delivery includes: - APS, complete (with built-in filter ele- ments); - Hose set I (4 m hose, 2 m hose; respec- tively incl. connection stubs and clamping hoses) - Power cord You can receive more than one, please choose the proper for your need - 4 adjustment feet M10, length: 85 mm - 1 open-end wrench HP Air Purifier System 11