HP Designjet H35000 HP Designjet H35000 and H45000 Printer Series - Unpacking - Page 2

5 Remove carriage restraints (continued) Ë Remove the plastic spacers from the rail, behind the carriage (2 upper and 1 lower). Upper spacer (1 of 2) 7 Load roll-fed media 1. Remove the media roll from its packaging. 2. Load the media roll onto the supply spool. 3. Load the supply spool onto the printer (unroll from the top of the spool). 4. Unspool the media onto the platen. 5. Press the Load Media key on the control panel. 6. Follow the onscreen instructions. Lower spacer Ì Carefully move the carriage to the left, unscrew the plates from the platen with the hex key, and remove. When the control panel prompts you to load media, press Cancel. Wearing the included protective gloves, remove the ink blotter pad and plastic wrap from the platen (under the carriage). Place gloves and shipping packaging in plastic bag, and discard. 8 Fill printheads with ink and prime 1. On the Front Page screen, press the Tools key, then select Maintenance > Printhead Procedures > Load Ink in All Heads. Wait for the load process to finish. 2. On the Front Page screen, press the Prime Bars key. 6 Install ink and profilers Open each ink box, pull out ink supply tube, remove profiler. Install the ink boxes into the wire rack and profilers into the docking station as indicated by the labels on the printer. 9 Connect the RIP and print Install the RIP and connect it to the printer. Refer to the RIP documentation for instructions. The computer running the RIP can be stored on the shelf in the rear of the printer. Filter Push connector into port Ink connection ports, below ink boxes Install profilers 10 If you have questions... See: User Manual Press ? on the printer control panel for quick help For service and support in North America: 800.925.0563 Outside North America: +1 952.944.4040 En Español: +1 952.943.3627 E-mail: [email protected] Web: www.colorspan.com or contact your reseller Printer supports four or six colors, depending on model © Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Printed in the US www.hp.com www.colorspan.com Revision A 0706479