HP Designjet L26500 HP Designjet L26500 Printer series - User's Guide - Page 30
as the loading/unloading table is designed to be used with the blue stop in place.
View all HP Designjet L26500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
8. The right stop of the spindle has two positions: one for rolls of the printer's maximum width, and another for narrower rolls. Remember to use the second position for narrower rolls, which improves the drying process and allows higher printing speeds. 9. Put the blue stop on to the upper end of the spindle, and push it towards the end of the roll. TIP: If the cardboard core of the substrate is longer than the substrate, you can load the substrate without inserting the blue stop, but care should be taken when unloading the substrate, as the loading/unloading table is designed to be used with the blue stop in place. TIP: When loading a roll that is 1549 mm (61 in) wide, you may find it easier to load without stops (remove both stops). 10. Slide the lever-lock to the locked position. Handle the substrate 26 Chapter 4 Handle the substrate ENWW