HP Deskpro /I Desktop PC 4/33i Deskpro Personal Computers Service Reference Gu - Page 57
-1790, Run the Drive Protection
View all HP Deskpro /I Desktop PC 4/33i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
POST Error Messages Continued Screen Message 1781-Disk 1 Failure Beeps* None Probable Cause Hard drive/format error. 1782-Disk Controller Failure None Hard drive circuitry error. 1790-Disk 0 Failure None Hard drive error or wrong drive type. * L = Long, S = Short Recommended Action 1. Run Computer Setup (F10 Setup). 2. Clear CMOS. 3. Check cable seating/jumper settings. 4. Run hard drive diagnostics. 5. Disconnect additional drives. 6. Run the Drive Protection System test if available. 7. Replace the hard drive. 1. Run Computer Setup (F10 Setup). 2. Clear CMOS. 3. Check cable seating /jumper settings. 4. Run hard drive diagnostics. 5. Disconnect additional drives. 6. Run the Drive Protection System test if available. 7. Replace the hard drive. 8. Replace the system board. 1. Run Computer Setup (F10 Setup). 2. Clear CMOS. 3. Check cable seating /jumper settings. 4. Run hard drive diagnostics. 5. Disconnect additional drives. 6. Confirm drive is supported on this computer (Large drive ROM support.) 7. Run the Drive Protection System test if available. 8. Replace the hard drive. 9. Replace the system board. continued Deskpro Service Reference Guide D-7