HP Deskpro 5100 Deskpro Personal Computers Service Reference Guide - Page 58
-1793, or Disk Failure
View all HP Deskpro 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
POST Error Messages Continued Screen Message 1791-Disk 1 Failure Beeps* None Probable Cause Hard drive error or wrong drive type. 1792-Secondary Disk Controller Failure None Hard drive circuitry error. 1793-Secondary Controller None or Disk Failure Hard drive circuitry error. * L = Long, S = Short Recommended Action 1. Run Computer Setup (F10 Setup). 2. Clear CMOS. 3. Check cable seating /jumper settings. 4. Run hard drive diagnostics. 5. Disconnect additional drives. 6. Confirm drive is supported on this computer (Large drive ROM support). 7. Run the Drive Protection System test if available. 8. Replace the hard drive. 9. Replace the system board. 1. Run Computer Setup (F10 Setup). 2. Clear CMOS. 3. Check cable seating /jumper settings. 4. Run hard drive diagnostics. 5. Disconnect additional drives. 6. Run the Drive Protection System test if available. 7. Replace the hard drive. 1. Run Computer Setup (F10 Setup). 2. Clear CMOS. 3. Check cable seating /jumper settings. 4. Run hard drive diagnostics. 5. Disconnect additional drives. 6. Run the Drive Protection System test if available. 7. Replace the hard drive. continued D-8 POST Error Messages