HP Dv2 1110us Service Guide - Page 76
Display assembly, Speaker assembly see
UPC - 884962269701
View all HP Dv2 1110us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Display assembly NOTE: The display assembly includes a webcam, a microphone, and 2 wireless antenna transceivers and cables. Description 12.1-inch WXGA+ BrightView display assembly, Espresso Black 12.1-inch WXGA+ BrightView display assembly, Moonlight White Spare part number 506769-001 517587-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the following components: a. Hard drive (see Hard drive on page 40) b. Memory module (see Memory module on page 43) c. WWAN module (see WWAN module on page 45) d. WLAN module (see WLAN module on page 47) e. Keyboard (see Keyboard on page 50) f. Top cover (see Top cover on page 53) g. Fan (see Fan on page 55) h. System board (see System board on page 59) i. Speaker assembly (see Speaker assembly on page 63) Remove the display assembly: 1. Open the computer display as far as possible. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 2. Remove the two Phillips PM2.0×5.0 screws (1) from each hinge that secures the display assembly to the computer. Each hinge also secures a grounding strap. 3. Disconnect the display panel cable ground loops (2). 68 Chapter 4 Removal and replacement procedures