HP Dv5 1150us Service Guide - Page 93
This cable connects to a LIF connector on the system board., Fingerprint reader board cable
View all HP Dv5 1150us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
3. Remove the three Phillips PM2.5×4.0 screws secure the top cover to the computer. 4. Turn the computer right-side up, with the front toward you. 5. Disconnect the following cables from the system board: (1) Bluetooth module cable (2) TouchPad cable NOTE: On computer models equipped with a standard display assembly, this cable connects to a ZIF connector on the system board. On computer models equipped with a Flush Glass display assembly, this cable connects to a LIF connector on the system board. (3) Fingerprint reader board cable NOTE: This cable connects to a LIF connector on the system board. NOTE: Step 6 applies only to computer models equipped with standard display assemblies. 6. Remove the two Phillips PM2.5×7.0 screws (1) that secure the top cover to the computer. Component replacement procedures 85