HP Dv6-1230us HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide - Page 98
TV tuner module cable, System board see
UPC - 884962326114
View all HP Dv6-1230us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
TV tuner module cable NOTE: The TV tuner module cable is available in the Cable Kit, spare part number 533466-001. Before removing the TV tuner module cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the following components: a. Hard drive (see Hard drive on page 57). b. Optical drive (see Optical drive on page 51). c. Switch cover and keyboard (see Switch cover and keyboard on page 63). d. Display assembly (see Display assembly on page 68). e. Top cover (see Top cover on page 80). f. USB board (see USB board on page 85). g. System board (see System board on page 88). Remove the TV tuner module cable: 1. Remove the TV tuner antenna connector from the clips (1) built into the base enclosure. 2. Remove the TV tuner module cable (2) from the clips and routing channel (3) built into the base enclosure. Reverse this procedure to install the TV tuner module cable. 90 Chapter 4 Removal and replacement procedures