HP Dv6940se HP Pavilion dv6500, dv6600, and dv6700 Entertainment PCs - Mainten - Page 57
Display inverter, covers are included in the Display Screw Kit, spare part number 431399-001.
UPC - 884420168225
View all HP Dv6940se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Display inverter NOTE: If it has been determined that the display inverter is the component that must be replaced to complete the computer repair, the display assembly does not have to be removed. Follow the procedures in this section to replace the display inverter. For information on replacing the display assembly and other display assembly internal components, see Display assembly on page 68. Description Display inverter (includes 2-sided tape) Spare part number 431391-001 Before removing the display inverter, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 46). Remove the display inverter: 1. Turn the computer display-side up, with the front toward you. 2. Open the computer as far as possible. 3. Remove the two rubber screw covers (1) on the display bezel bottom edge. The display rubber screw covers are included in the Display Screw Kit, spare part number 431399-001. 4. Remove the two Phillips PM2.5×5.0 screws (2) that secure the display bezel bottom edge to the display assembly. 5. Flex the inside edges of the left and right sides (1) and the bottom edge (2) of the display bezel until the bezel disengages from the display enclosure. Component replacement procedures 49