HP Dv7-1245dx HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 78
by pulling it away from the slot at an angle., Remove the module
UPC - 884420805588
View all HP Dv7-1245dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 54). 5. Remove the accessory cover (see Hard drive on page 59). Remove the memory module: 1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 2. Remove the module (2) by pulling it away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. 68 Chapter 4 Removal and replacement procedures