HP Dv7-3060us HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 89
Lift up on the right side of the system board until it is at approximately a 45-degree angle
UPC - 884962549155
View all HP Dv7-3060us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
2. Disconnect the hard drive connector cables from the system board. 3. Remove the two Phillips PM2.5×5.0 screws (1) that secure the system board to the base enclosure. 4. Lift up on the right side of the system board until it is at approximately a 45-degree angle (2), and then lift the system board to the right and up and out of the base enclosure (3). Component replacement procedures 81
2.
Disconnect the hard drive connector cables from the system board.
3.
Remove the two Phillips PM2.5×5.0 screws
(1)
that secure the system board to the base enclosure.
4.
Lift up on the right side of the system board until it is at approximately a 45-degree angle
(2)
, and
then lift the system board to the right and up and out of the base enclosure
(3)
.
Component replacement procedures
81