HP Dx2250 Hardware Reference Guide - dx2250 MT - Page 25
Removing and Replacing a Coin Cell Battery Type 2, Removing a Coin Cell Battery Type 3
UPC - 883585243983
View all HP Dx2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
b. To insert the new battery, slide one edge of the replacement battery under the holder's lip with the positive side up. Push the other edge down until the clamp snaps over the other edge of the battery (2). Figure 3-2 Removing and Replacing a Coin Cell Battery (Type 2) Type 3 a. Pull back on the clip (1) that is holding the battery in place, and remove the battery (2). b. Insert the new battery and position the clip back into place. Figure 3-3 Removing a Coin Cell Battery (Type 3) NOTE After the battery has been replaced, use the following steps to complete this procedure. 8. Replace the computer access panel. ENWW 19
b.
To insert the new battery, slide one edge of the replacement battery under the holder’s lip with
the positive side up. Push the other edge down until the clamp snaps over the other edge of
the battery (2).
Figure 3-2
Removing and Replacing a Coin Cell Battery (Type 2)
Type 3
a.
Pull back on the clip (1) that is holding the battery in place, and remove the battery (2).
b.
Insert the new battery and position the clip back into place.
Figure 3-3
Removing a Coin Cell Battery (Type 3)
NOTE
After the battery has been replaced, use the following steps to complete this
procedure.
8.
Replace the computer access panel.
ENWW
19