HP ENVY 14-1211nr HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 57
Remove the two Phillips PM2.0×3.0 screws that secure the WLAN module to the system board.
View all HP ENVY 14-1211nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4. Disconnect the WLAN antenna cables from the terminals on the WLAN module. NOTE: The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal. The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal. 5. Remove the two Phillips PM2.0×3.0 screws that secure the WLAN module to the system board. (The WLAN module tilts up.) Component replacement procedures 49
4.
Disconnect the WLAN antenna cables from the terminals on the WLAN module.
NOTE:
The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal.
The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal.
5.
Remove the two Phillips PM2.0×3.0 screws that secure the WLAN module to the system board.
(The WLAN module tilts up.)
Component replacement procedures
49