HP ENVY 15-3047nr HP ENVY 15 - Maintenance and Service Guide - Page 58
Phillips PM2.0×2.9 screws, Lift the rear edge of the top cover
View all HP ENVY 15-3047nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4. Remove the eight Phillips PM2.0×2.5 broad head screws (1) from the battery bay and the three Phillips PM2.0×2.9 screws (2) near the volume adjustment cable that secure the top cover to the computer. 5. Turn the computer display-side up, with the front toward you. 6. Open the computer as far as it will open. 7. Lift the rear edge of the top cover (1) until the top cover disengages from the base enclosure. 50 Chapter 4 Removal and replacement procedures ENWW
4.
Remove the eight Phillips PM2.0×2.5 broad head screws
(1)
from the battery bay and the three
Phillips PM2.0×2.9 screws
(2)
near the volume adjustment cable that secure the top cover to
the computer.
5.
Turn the computer display-side up, with the front toward you.
6.
Open the computer as far as it will open.
7.
Lift the rear edge of the top cover
(1)
until the top cover disengages from the base enclosure.
50
Chapter 4
Removal and replacement procedures
ENWW