HP ENVY 15-ae000 ENVY Notebook PC Maintenance and Service Guide - Page 69
Fingerprint reader board, reader board cable
View all HP ENVY 15-ae000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Fingerprint reader board Description Fingerprint reader board Fingerprint reader bracket Fingerprint reader cable Spare part number 818089-001 812700-001 818039-001 Before removing the fingerprint reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 35). 5. Remove the battery (see Battery on page 54). 6. Remove the hard drive (see Hard drive on page 55). 7. Remove the right speaker (Speakers (front) on page 57). Remove the fingerprint reader board: 1. Disconnect the fingerprint reader board cable (1) from the touchpad board. 2. Pull the ribbon cable up to disengage the adhesive securing it to the computer (2). 3. Remove the Phillips broadhead PM2.0×5.0 screw (3) that secures the fingerprint reader board to the computer. 4. Lift the bracket from atop the fingerprint reader board (4). Component replacement procedures 61