HP ENVY 15-bp000 Maintenance and Service Guide - Page 41
Hard drive, Remove the battery see
View all HP ENVY 15-bp000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or the hard drive cable. The hard drive bracket is available using spare part number 924350-001. The hard drive cable is available using spare part number 924326-001. Description 1-TB, 7200-rpm, SATA, 9.5-mm hard drive Spare part number 766457-857 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Remove the battery (see Battery on page 32). Remove the hard drive: 1. Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 2. Use the tab built into the hard drive rubber sleeve to remove the hard drive (2). Component replacement procedures 33