HP ENVY 15-j007cl HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 Notebook PC - Page 61
enclosure by double-sided tape., from the base enclosure. The RTC battery is attached to the base
View all HP ENVY 15-j007cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
NOTE: If the computer is equipped with an AMD processor, complete steps 1 through 3 to remove the RTC battery. If the computer is equipped with an Intel processor, complete step 4 to remove the RTC battery. 1. Disconnect the RTC battery cable (1) from the system board. 2. Detach the RTC battery (2) from the base enclosure. (The RTC battery is attached to the base enclosure by double-sided tape.) 3. Remove the RTC battery. NOTE: Step 4 applies only to computer models equipped with an Intel processor. Component replacement procedures 53
NOTE:
If the computer is equipped with an AMD processor, complete steps 1 through 3 to remove
the RTC battery. If the computer is equipped with an Intel processor, complete step 4 to remove the
RTC battery.
1.
Disconnect the RTC battery cable
(1)
from the system board.
2.
Detach the RTC battery
(2)
from the base enclosure. (The RTC battery is attached to the base
enclosure by double-sided tape.)
3.
Remove the RTC battery.
NOTE:
Step 4 applies only to computer models equipped with an Intel processor.
Component replacement procedures
53