HP ENVY 15-j075nr HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 Notebook PC - Page 90
Power connector cable, Disconnect the power cable
View all HP ENVY 15-j075nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Power connector cable Description Spare part number For use on all computer models equipped with a graphics subsystem with UMA memory 720537-001 For use only on computer models equipped with an Intel processor and a graphics subsystem with 720538-001 discrete memory Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: a. Solid-state drive (see Solid-state drive on page 44) b. Hard drive (see Hard drive on page 47) c. Base enclosure (see Base enclosure on page 55) Remove the power connector cable: 1. Disconnect the power cable (1) from the system board. 2. Release the power connector cable from the clips (2) built into the keyboard shield. 3. Release the power connector (3) from the clips and mold built into the top cover. 4. Remove the power connector cable. 82 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts