HP ENVY 17-1100 HP ENVY 17 - Maintenance and Service Guide - Page 84
Remove the Phillips PM2.0×4.0 screw, If it is necessary to replace the Bluetooth module
View all HP ENVY 17-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
8. If it is necessary to replace the webcam/microphone module: a. Remove the Phillips PM2.0×4.0 screw (1) that secures the webcam/microphone module to the display bezel. b. Release the webcam/microphone module (2) as far as the webcam/microphone module allows. c. Disconnect the webcam/microphone module cable (3) from the webcam/ microphone module. d. Remove the webcam/microphone module. The webcam/microphone module is available using spare part number 603779-001. 9. If it is necessary to replace the Bluetooth module: a. Detach the Bluetooth module (1) from the display bezel. (The Bluetooth module is attached to the display bezel using double-sided tape). 74 Chapter 4 Removal and replacement procedures
8.
If it is necessary to replace the webcam/microphone module:
a.
Remove the Phillips PM2.0×4.0 screw
(1)
that secures the webcam/microphone module to
the display bezel.
b.
Release the webcam/microphone module
(2)
as far as the webcam/microphone
module allows.
c.
Disconnect the webcam/microphone module cable
(3)
from the webcam/
microphone module.
d.
Remove the webcam/microphone module. The webcam/microphone module is available
using spare part number 603779-001.
9.
If it is necessary to replace the Bluetooth module:
a.
Detach the Bluetooth module
(1)
from the display bezel. (The Bluetooth module is attached to
the display bezel using double-sided tape).
74
Chapter 4
Removal and replacement procedures