HP ENVY 17-3090nr HP ENVY 17 - Maintenance and Service Guide - Page 71
board and system board., Disconnect the audio/USB board ZIF cable
View all HP ENVY 17-3090nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4. If it is necessary to replace the audio/USB board cable: a. Disconnect the audio/USB board cable (1) from the audio/USB board and system board. b. Release the audio/USB board cable through the opening (2) in the base enclosure. c. Remove the audio/USB board cable by lifting the cable through the opening (3) between the base enclosure and the system board. 5. If it is necessary to replace the audio/USB board ZIF cable: a. Disconnect the audio/USB board ZIF cable (1) from the ZIF connectors on the audio/USB board and system board. b. Release the audio/USB board ZIF cable through the openings (2) in the base enclosure. c. Remove the audio/USB board ZIF cable (3). Reverse this procedure to install the audio/USB board and cables. ENWW Component replacement procedures 63